Q235 Steel Double Deep Pallet Racking , Galvanized Push Back Racking
Double Deep Pallet Racking features:
1. Pick face remains constantly full.
2. A low damage environment, with truck outside racking always.
3. High storage density with speedy accessibility, but FILO.
4. Conventional handling equipment can be used.
5. Pallet quality may not be so critical as carts or cradles are always used.
Double Deep Pallet Racking Work
The push back pallet rack has a certain slope, about 3 °. It uses its own weight to store goods. The overall structure adopts the "clip" principle. The pallets are placed on the carrying cart and pushed into the rack in turn. The forklift does not need to enter the rack, and the operation method is exactly the same as that of ordinary racks. Since multiple pallet positions can be designed in the rack depth direction, the space utilization of the push-back pallet rack is higher than that of ordinary rack. Both safety and operating efficiency are much higher than through racks.
Double Deep Pallet Racking detail
Cart - Bearings – Rails – Anti-Slip Steel – Rail Bracket – Front Stopper
Double Deep Pallet Racking function
Double Deep Pallet Racking, also known as push-in rack, are connected by multi-layer carts between the front and rear beams. Stacked goods are pushed into the carts from the outside, and the stored goods will push the original goods into it. It is usually used in places where the storage space is extremely limited, but the storage capacity must be increased or the time required for the goods must be increased.
The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.
The press-in racking system has higher requirements for the manufacturing accuracy of the rack. Because the cooperation between the pallet cart and the guide rail is high, the manufacturing and installation accuracy is strict. Failure to do so will cause the racking system to run poorly and affect work effectiveness.
The cost of press-in rack is higher, which is directly proportional to its value. Its warehouse utilization rate reaches about 80%, and the space utilization rate of the warehouse can be improved.
It is more than 30% high, easy to access and flexible, and is the rack with the highest storage efficiency.
Double Deep Pallet Racking application
- Push-back rack are composed of typical structural parts such as pallet carts. Pallet carts have flow characteristics. Goods are specified to enter and exit at one end of the rack, and follow the order of advanced back-out;
- When storing and transporting goods, the forklift works only at the lower end of the rack aisle, and does not need to enter the rack goods storage aisle. Such shelves have the typical characteristics of high storage density and fast storage and transportation speed;
Design Features
The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.
